BodPave 40 Plastic porous pavers

BodPave 40 Plastic porous pavers

BodPave 40 permeable paving grids

Application Function

Ground Stabilisation

Market Sectors

Highways | Grass and Ground


BodPave 40 grass pavers are an interlocking cellular paving grid system for grass and ground reinforcement applications where there is regular pedestrian or vehicle use. BodPave 40 permeable paving grids can be installed with either a grass or gravel filled surface and allow full rainwater penetration. Manufactured from UV stabilised 100% recycled HDPE, in black or green, BodPave 40 plastic pavers are strong, chemically inert & non-toxic, enabling them to provide a durable, safe & sustainable eco-friendly surface for trafficked areas. Designed for applications such as:

• Grass & Gravel Car Parks
• Overflow Car Parks
• Emergency/HGV Service Access Routes
• Aircraft Taxiways & Helipads
• Pedestrian Walkways
• Wheelchair / Disabled Access Routes
• Golf Buggy Paths
• SUDS Source Control

BodPave 40 grass pavers are a cost effective solution to worn & rutted grassed areas, displaced gravel and for Source Control of surface water run-off. BodPave 40 paving grids are designed to be installed onto a well prepared, free-draining and relatively even surface using either Terram 'Reduced-Dig System' or by employing a full sub-base construction incorporating a geogrid reinforcement layer. The ground reinforcement paving grids simply connect together and are  filled with either a sand : soil rootzone and seeded for use as grass pavers which provides a visually pleasant and stable surface structure through which grass can be grown, or filled with an angular gravel for use as a gravel retention reinforcement surface. Construction profiles for each application will be determined by the specific site conditions & loading criteria. Detailed design literature and technical support are downloadable.

The grass reinforcement paver grids have a very open cell structure allowing unrestricted healthy grass root growth and water infiltration and can be used as part of a sustainable urban drainage system (SUDS). The paver grids also incorporate 25mm 'ground-spikes' on the base which fix through the adjacent paving grid's edge-loops to provide the entire structure with firm anchorage and structural integrity and making them easy to install at rates of up to 100m² per hour.

BodPave 40 grass pavers should be installed onto a firm level sub-base (typically a DoT Type 3 or porous sub-base). The thickness of this base is dependant on the existing ground conditions and the design load specifications. Please contact our technical team for further details.

Please note that with all BODPAVE installations, we strongly recommend that all areas should have sufficient drainage prior to the installation. Failure to ensure this may result in the product not performing as intended.

Depending on the installation method employed, the installation of BODPAVE 40 grass pavers may require or benefit from using our stabilisation geogrid and geotextile membrane fabric to increase structural integrity and to reduce the sub-base depth thus reducing installation costs. Our downloadable Specification, Design and Installation guidance can assist your choice.

Product Specification

Paver Size : 500mm x 500mm x 40mm (+35mm integral ground anchor spike)

ColorWeightLoad Bearing 
Capacity
MaterialPart No.
Black4.8kg/m²150 t/m²100% Recycled 
Polyethylene
151516
Green4.8kg/m²150 t/m²100% Recycled 
Polyethylene
113804

Downloads

TERRAM Highways & Roads
TERRAM Grass Reinforcement Solutions
BODPAVE 40 porous pavers
BODPAVE 40 Reduced Dig SDI
BODPAVE 40 Gravel SDI
BODPAVE 40 Grassed SDI
BODPAVE 40 Grass filled porous paver for car parking (Wollaton, Notts)
BODPAVE 40 Gravel filled porous paver for car and coach parking (Tycross Zoo)
BODPAVE 40 Golf paths and buggy routes (Les Ormes Golf Course, Jersey)
BODPAVE 40 Grass filled porous paver for car parking (Howden, Humberside)
BODPAVE 40 Grass filled paver for overflow parling (Kent)
BODPAVE 40
Grass & Ground Reinforcement